PS stainless steel normally closed direct acting solenoid valve

Product parametersType specification tableSize and data

PS stainless steel normally closed direct acting solenoid valve

PS series direct acting solenoid valve, zero pressure starting up, quickly open

and closed. Normally closed control type, power on valve open, power off valve

closed. Material has wrought brass and stainless steel, according to the difference

medium, chose the relativity seal material, suitable for different working conditions.

Standard technical parameters

Body

Interface size: 1/8-4’’

Flow diameter: Normally closed type: 2.5-100mm

Body material: Wrought brass, stainless steel 304, 316

Connection type: G thread, NPT thread, flanged

Pressure class: 0-10bar

Structure type: Pilot type (the pipeline without pressure directly start-up)

Control type: Normally closed

Components

Seal material: NBR: 0℃-80℃

VITON: 0℃-120℃

Ambient temperature: NBR: 0℃-65℃

Install way: According to the body tag to install, in order to

enhance the valve service life, better to coil upward, horizontal installation;

Coil voltage:AC24V/110V/220V/230V/240V 50/60HZ DC24V/12V ±10% fluctuation allowed

Explosion-proof class: Optional EX m II BT4

Type specification table

Pipe size Flow size mm		CV Value	Pressure differential(Kgf/cm2)					Power		Weight ( KG)
			The mini. Pressure	The max. working pressure				Power
				Air Gas		Water, liquids		VA	W
				AC	DC	AC	DC	AC 220 V	DC 24V		Wrought brass
1/8” 1/4”	2.5	0.23	0	7	5	7	5	13	8.5	0.35	PS-2.5
	3	0.3	0	5	4	5	4	13	8.5	0.35	PS-3
	5	0.65	0	6	4	6	4	33	20	0.46	PS-5
	6	0.8	0	4	2.5	4	2.5	33	20	0.46	PS-6
	7.5	1.0	0	1.5	1	1.5	1	33	20	0.46	PS-7.5
3/8”	16	4.8	0	10	6	10	6	33	20	0.9	PS-10
1/2”	16	4.8	0	10	6	10	6	33	20	0.9	PS-15
3/4”	20	7.6	0	10	6	10	6	33	20	1.08	PS-20
1”	25	12	0	10	6	10	6	33	20	1.4	PS-25
11/4”	32	24	0	10	6	10	6	70	40	2.5	PS-32
11/2”	40	29	0	10	6	10	6	70	40	2.9	PS-40
2”	50	48	0	10	6	10	6	70	40	5.2	PS-50
Flange 4 holes Connection	25	12	0	10	6	10	6	70	40	2.9	PS-25
	32	24	0	10	6	10	6	70	40	5.1	PS-32
	40	29	0	10	6	10	6	70	40	6.1	PS-40
	50	48	0	10	6	10	6	70	40	8.2	PS-50

External dimension size drawing

Thread connection type

Pipe size Flow size mm		CV Value	Outline dimension Length × Width × Height A×B×H	Weight KG	Wrought brass
1/8” 1/4”	2.5	0.23	47×31×67	0.35	PS-2.5
	3	0.3	47×31×67	0.35	PS-3
	5	0.65	54×31×81	0.46	PS-5
	6	0.8	54×31×81	0.46	PS-6
	7.5	1.0	54×33×98	0.46	PS-7.5
3/8”	16	4.8	69×57×106	0.9	PS-10
1/2”	16	4.8	69×57×106	0.9	PS-15
3/4”	20	7.6	73×57×114	1.08	PS-20
1”	25	12	99×77×121	1.4	PS-25
11/4”	32	24	112×87×150	2.5	PS-32
11/2”	40	29	123×94×160	2.9	PS-40
2”	50	48	140×115×160	5.2	PS-50
Flange 4 Holes connection	25	12	140×115×160	2.9	PS-25F
	32	24	152×135×215	5.1	PS-32F
	40	29	152×145×215	6.1	PS-40F
	50	48	195×160×220	8.2	PS-50F

Flanged connection type